Detalhes do modelo de objeto

JavaScript é uma linguagem orientada a objetos com base em protótipos, em vez de ser baseada em classes. Devido a essa base diferente, pode ser menos evidente como o JavaScript permite criar hierarquias de objetos e ter herança de propriedades e seus valores. Este capítulo tenta esclarecer essa situação.

Linguagens baseada em classe vs. baseada em protótipo

Linguagens orientadas a objetos baseadas em classe, como Java e C + +, são fundadas no conceito de duas entidades distintas: classes e instâncias.

• Uma classe define todas as propriedades (considerando-se os métodos e campos em Java, ou membros em C + +, para ser propriedades) que caracterizam um determinado conjunto de objetos. Uma classe é algo abstrato, ao invés de qualquer membro particular do conjunto de objetos que descreve. Por exemplo, a classe Employee poderia representar o conjunto de todos os funcionários.
• Uma instância, por outro lado, é a instanciação de uma classe, ou seja, um dos seus membros. Por exemplo, Victoria poderia ser uma instância da classe Employee, o que representa um indivíduo em particular como um empregado. Uma instância tem exatamente as propriedades de sua classe pai (nem mais, nem menos).

Uma linguagem baseada em protótipo, como JavaScript, não faz essa distinção: ele simplesmente tem objetos. Uma linguagem baseada em protótipo tem a idéia de um objeto prototípico, um objeto usado como um modelo do qual obtém as propriedades iniciais para um novo objeto. Qualquer objeto pode especificar suas próprias propriedades, quando você o cria ou em tempo de execução. Além disso, qualquer objeto pode ser associado como um protótipo de outro objeto, permitindo ao segundo objeto compartilhar as propriedades do primeiro objeto.

Definindo uma classe

Em linguagens baseadas em classe, você define uma classe em uma definição de classe separada. Nessa definição, você pode especificar métodos especiais, chamados de construtores, para criar instâncias da classe. Um método construtor pode especificar valores iniciais para as propriedades da instância e executar outros processamentos apropriados no momento da criação. Você pode usar o operador new, em associação com o método construtor para criar instâncias de classe.

O JavaScript segue um modelo semelhante, mas não têm uma definição da classe separada do construtor. Em vez disso, você define uma função de construtor para criar objetos com um conjunto inicial particular de propriedades e valores. Qualquer função JavaScript pode ser usado como um construtor. Você pode usar o operador new com uma função de construtor para criar um novo objeto.

Subclasses e herança

Em uma linguagem baseada em classe, você cria a hierárquia de classes através de sua definição. Em uma definição de classes,  você pode  especificar que a nova classe é uma subclasse de outra já existente. A subclasse herda todas as propriedades da  superclasse e pode adicionar novas propriedades ou modificar propriedades herdadas. Por exemplo, assuma que  a classe Employee tem somente duas propriedades name e dept , e Manager é uma subclasse of Employee que adiciona a propriedade reports. Neste caso, uma instância da classe Manager  terá todas as três propiedade: name, dept, and reports.

Em JavaScript, a herança é implementada associando um objeto protótipico a qualquer função de construtor. Então, você pode criar exatamente o mesmo exemplo: Employee — Manager, mas utilizando uma terminologia ligeramente diferente. Primeiro, define-se a função de construtor de  Employee, especificando as propriedades name e dept. Depois,  define-se a função de construtor de  Manager, especificando a propriedade reports. Finalmente, associa-se um objeto new Employee  como  prototype para a função de construtor Manager. Então, quando vocẽ criar um objeto new Manager, ele herdará as propriedades  name e dept do obeto Employee.

Adicionando e removendo propriedades

Em uma linguagem baseada en classe, você normalmente cria uma classe em tempo de de compilação e então vincula as instâncias da classe em tempo de compilação, ou tempo de execução. Você não pode alterar o número ou o tipo de propriedade de uma classe após definí-la. Em javaScript, no entanto, você pode adicionar ou remover propriedades de qualquer objeto. Se você adiciona uma propriedade a um objeto que é usado como o protótipo para um conjunto de objetos, os objetos no qual ele é protótipo herdarão as novas propriedades.

Sumário das diferenças

A tabela a seguir apresenta um breve resumo de algumas dessas diferenças. O restante deste capítulo descreve os detalhes do uso de construtores e protótipos JavaScript para criar uma hierarquia de objetos e compara isso à maneira como você faria isso em Java.

The employee example

The remainder of this chapter uses the employee hierarchy shown in the following figure.

Creating the hierarchy

There are several ways to define appropriate constructor functions to implement the Employee hierarchy. How you choose to define them depends largely on what you want to be able to do in your application.

This section shows how to use very simple (and comparatively inflexible) definitions to demonstrate how to get the inheritance to work. In these definitions, you cannot specify any property values when you create an object. The newly-created object simply gets the default values, which you can change at a later time.

In a real application, you would probably define constructors that allow you to provide property values at object creation time (see More flexible constructors for information). For now, these simple definitions demonstrate how the inheritance occurs.

The following Java and JavaScript Employee definitions are similar. The only difference is that you need to specify the type for each property in Java but not in JavaScript (this is due to Java being a strongly typed language while JavaScript is a weakly typed language).

function Employee() {
  this.name = "";
  this.dept = "general";
}

public class Employee {
   public String name = "";
   public String dept = "general";
}

The Manager and WorkerBee definitions show the difference in how to specify the next object higher in the inheritance chain. In JavaScript, you add a prototypical instance as the value of the prototype property of the constructor function. You can do so at any time after you define the constructor. In Java, you specify the superclass within the class definition. You cannot change the superclass outside the class definition.

function Manager() {
  Employee.call(this);
  this.reports = [];
}
Manager.prototype = Object.create(Employee.prototype);

function WorkerBee() {
  Employee.call(this);
  this.projects = [];
}
WorkerBee.prototype = Object.create(Employee.prototype);

public class Manager extends Employee {
   public Employee[] reports = new Employee[0];
}



public class WorkerBee extends Employee {
   public String[] projects = new String[0];
}

The Engineer and SalesPerson definitions create objects that descend from WorkerBee and hence from Employee. An object of these types has properties of all the objects above it in the chain. In addition, these definitions override the inherited value of the dept property with new values specific to these objects.

function SalesPerson() {
   WorkerBee.call(this);
   this.dept = "sales";
   this.quota = 100;
}
SalesPerson.prototype = Object.create(WorkerBee.prototype);

function Engineer() {
   WorkerBee.call(this);
   this.dept = "engineering";
   this.machine = "";
}
Engineer.prototype = Object.create(WorkerBee.prototype);

public class SalesPerson extends WorkerBee {
   public double quota;
   public dept = "sales";
   public quota = 100.0;
}


public class Engineer extends WorkerBee {
   public String machine;
   public dept = "engineering";
   public machine = "";
}

Using these definitions, you can create instances of these objects that get the default values for their properties. The next figure illustrates using these JavaScript definitions to create new objects and shows the property values for the new objects.

Creating objects with simple definitions

var jim = new Employee;
// jim.name is ''
// jim.dept is 'general'

var sally = new Manager;
// sally.name is ''
// sally.dept is 'general'
// sally.reports is []

var mark = new WorkerBee;
// mark.name is ''
// mark.dept is 'general'
// mark.projects is []

var fred = new SalesPerson;
// fred.name is ''
// fred.dept is 'sales'
// fred.projects is []
// fred.quota is 100

var jane = new Engineer;
// jane.name is ''
// jane.dept is 'engineering'
// jane.projects is []
// jane.machine is ''

Object properties

This section discusses how objects inherit properties from other objects in the prototype chain and what happens when you add a property at run time.

Inheriting properties

Suppose you create the mark object as a WorkerBee with the following statement:

var mark = new WorkerBee;

When JavaScript sees the new operator, it creates a new generic object and passes this new object as the value of the this keyword to the WorkerBee constructor function. The constructor function explicitly sets the value of the projects property, and implicitly sets the value of the internal __proto__ property to the value of WorkerBee.prototype. (That property name has two underscore characters at the front and two at the end.) The __proto__ property determines the prototype chain used to return property values. Once these properties are set, JavaScript returns the new object and the assignment statement sets the variable mark to that object.

This process does not explicitly put values in the mark object (local values) for the properties that mark inherits from the prototype chain. When you ask for the value of a property, JavaScript first checks to see if the value exists in that object. If it does, that value is returned. If the value is not there locally, JavaScript checks the prototype chain (using the __proto__ property). If an object in the prototype chain has a value for the property, that value is returned. If no such property is found, JavaScript says the object does not have the property. In this way, the mark object has the following properties and values:

mark.name = "";
mark.dept = "general";
mark.projects = [];

The mark object inherits values for the name and dept properties from the prototypical object in mark.__proto__. It is assigned a local value for the projects property by the WorkerBee constructor. This gives you inheritance of properties and their values in JavaScript. Some subtleties of this process are discussed in Property inheritance revisited.

Because these constructors do not let you supply instance-specific values, this information is generic. The property values are the default ones shared by all new objects created from WorkerBee. You can, of course, change the values of any of these properties. So, you could give specific information for mark as follows:

mark.name = "Doe, Mark";
mark.dept = "admin";
mark.projects = ["navigator"];

Adding properties

In JavaScript, you can add properties to any object at run time. You are not constrained to use only the properties provided by the constructor function. To add a property that is specific to a single object, you assign a value to the object, as follows:

mark.bonus = 3000;

Now, the mark object has a bonus property, but no other WorkerBee has this property.

If you add a new property to an object that is being used as the prototype for a constructor function, you add that property to all objects that inherit properties from the prototype. For example, you can add a specialty property to all employees with the following statement:

Employee.prototype.specialty = "none";

As soon as JavaScript executes this statement, the mark object also has the specialty property with the value of "none". The following figure shows the effect of adding this property to the Employee prototype and then overriding it for the Engineer prototype.

Adding properties

More flexible constructors

The constructor functions shown so far do not let you specify property values when you create an instance. As with Java, you can provide arguments to constructors to initialize property values for instances. The following figure shows one way to do this.

Specifying properties in a constructor, take 1

The following table shows the Java and JavaScript definitions for these objects.

function Employee (name, dept) {
  this.name = name || "";
  this.dept = dept || "general";
}

public class Employee {
   public String name;
   public String dept;
   public Employee () {
      this("", "general");
   }
   public Employee (String name) {
      this(name, "general");
   }
   public Employee (String name, String dept) {
      this.name = name;
      this.dept = dept;
   }
}

function WorkerBee (projs) {
 
 this.projects = projs || [];
}
WorkerBee.prototype = new Employee;

public class WorkerBee extends Employee {
   public String[] projects;
   public WorkerBee () {
      this(new String[0]);
   }
   public WorkerBee (String[] projs) {
      projects = projs;
   }
}

 
function Engineer (mach) {
   this.dept = "engineering";
   this.machine = mach || "";
}
Engineer.prototype = new WorkerBee;

public class Engineer extends WorkerBee {
   public String machine;
   public Engineer () {
      dept = "engineering";
      machine = "";
   }
   public Engineer (String mach) {
      dept = "engineering";
      machine = mach;
   }
}

These JavaScript definitions use a special idiom for setting default values:

this.name = name || "";

The JavaScript logical OR operator (||) evaluates its first argument. If that argument converts to true, the operator returns it. Otherwise, the operator returns the value of the second argument. Therefore, this line of code tests to see if name has a useful value for the name property. If it does, it sets this.name to that value. Otherwise, it sets this.name to the empty string. This chapter uses this idiom for brevity; however, it can be puzzling at first glance.

With these definitions, when you create an instance of an object, you can specify values for the locally defined properties. You can use the following statement to create a new Engineer:

var jane = new Engineer("belau");

Jane's properties are now:

jane.name == "";
jane.dept == "engineering";
jane.projects == [];
jane.machine == "belau"

Notice that with these definitions, you cannot specify an initial value for an inherited property such as name. If you want to specify an initial value for inherited properties in JavaScript, you need to add more code to the constructor function.

So far, the constructor function has created a generic object and then specified local properties and values for the new object. You can have the constructor add more properties by directly calling the constructor function for an object higher in the prototype chain. The following figure shows these new definitions.

Specifying properties in a constructor, take 2

Let's look at one of these definitions in detail. Here's the new definition for the Engineer constructor:

function Engineer (name, projs, mach) {
  this.base = WorkerBee;
  this.base(name, "engineering", projs);
  this.machine = mach || "";
}

Suppose you create a new Engineer object as follows:

var jane = new Engineer("Doe, Jane", ["navigator", "javascript"], "belau");

JavaScript follows these steps:

1. The new operator creates a generic object and sets its __proto__ property to Engineer.prototype.
2. The new operator passes the new object to the Engineer constructor as the value of the this keyword.
3. The constructor creates a new property called base for that object and assigns the value of the WorkerBee constructor to the base property. This makes the WorkerBee constructor a method of the Engineer object.The name of the base property is not special. You can use any legal property name; base is simply evocative of its purpose.

4. The constructor calls the base method, passing as its arguments two of the arguments passed to the constructor ("Doe, Jane" and ["navigator", "javascript"]) and also the string "engineering". Explicitly using "engineering" in the constructor indicates that all Engineer objects have the same value for the inherited dept property, and this value overrides the value inherited from Employee.

5. Because base is a method of Engineer, within the call to base, JavaScript binds the this keyword to the object created in Step 1. Thus, the WorkerBee function in turn passes the "Doe, Jane" and "engineering" arguments to the Employee constructor function. Upon return from the Employee constructor function, the WorkerBee function uses the remaining argument to set the projects property.
6. Upon return from the base method, the Engineer constructor initializes the object's machine property to "belau".
7. Upon return from the constructor, JavaScript assigns the new object to the jane variable.

You might think that, having called the WorkerBee constructor from inside the Engineer constructor, you have set up inheritance appropriately for Engineer objects. This is not the case. Calling the WorkerBee constructor ensures that an Engineer object starts out with the properties specified in all constructor functions that are called. However, if you later add properties to the Employee or WorkerBee prototypes, those properties are not inherited by the Engineer object. For example, assume you have the following statements:

function Engineer (name, projs, mach) {
  this.base = WorkerBee;
  this.base(name, "engineering", projs);
  this.machine = mach || "";
}
var jane = new Engineer("Doe, Jane", ["navigator", "javascript"], "belau");
Employee.prototype.specialty = "none";

The jane object does not inherit the specialty property. You still need to explicitly set up the prototype to ensure dynamic inheritance. Assume instead you have these statements:

function Engineer (name, projs, mach) {
  this.base = WorkerBee;
  this.base(name, "engineering", projs);
  this.machine = mach || "";
}
Engineer.prototype = new WorkerBee;
var jane = new Engineer("Doe, Jane", ["navigator", "javascript"], "belau");
Employee.prototype.specialty = "none";

Now the value of the jane object's specialty property is "none".

Another way of inheriting is by using the call() / apply() methods. Below are equivalent:

function Engineer (name, projs, mach) {
  this.base = WorkerBee;
  this.base(name, "engineering", projs);
  this.machine = mach || "";
}

function Engineer (name, projs, mach) {
  WorkerBee.call(this, name, "engineering", projs);
  this.machine = mach || "";
}

Using the javascript call() method makes a cleaner implementation because the base is not needed anymore.

Property inheritance revisited

The preceding sections described how JavaScript constructors and prototypes provide hierarchies and inheritance. This section discusses some subtleties that were not necessarily apparent in the earlier discussions.

Local versus inherited values

When you access an object property, JavaScript performs these steps, as described earlier in this chapter:

1. Check to see if the value exists locally. If it does, return that value.
2. If there is not a local value, check the prototype chain (using the __proto__ property).
3. If an object in the prototype chain has a value for the specified property, return that value.
4. If no such property is found, the object does not have the property.

The outcome of these steps depends on how you define things along the way. The original example had these definitions:

function Employee () {
  this.name = "";
  this.dept = "general";
}

function WorkerBee () {
  this.projects = [];
}
WorkerBee.prototype = new Employee;

With these definitions, suppose you create amy as an instance of WorkerBee with the following statement:

var amy = new WorkerBee;

The amy object has one local property, projects. The values for the name and dept properties are not local to amy and so are gotten from the amy object's __proto__ property. Thus, amy has these property values:

amy.name == "";
amy.dept == "general";
amy.projects == [];

Now suppose you change the value of the name property in the prototype associated with Employee:

Employee.prototype.name = "Unknown"

At first glance, you might expect that new value to propagate down to all the instances of Employee. However, it does not.

When you create any instance of the Employee object, that instance gets a local value for the name property (the empty string). This means that when you set the WorkerBee prototype by creating a new Employee object, WorkerBee.prototype has a local value for the name property. Therefore, when JavaScript looks up the name property of the amy object (an instance of WorkerBee), JavaScript finds the local value for that property in WorkerBee.prototype. It therefore does not look farther up the chain to Employee.prototype.

If you want to change the value of an object property at run time and have the new value be inherited by all descendants of the object, you cannot define the property in the object's constructor function. Instead, you add it to the constructor's associated prototype. For example, assume you change the preceding code to the following:

function Employee () {
  this.dept = "general";
}
Employee.prototype.name = "";

function WorkerBee () {
  this.projects = [];
}
WorkerBee.prototype = new Employee;

var amy = new WorkerBee;

Employee.prototype.name = "Unknown";

In this case, the name property of amy becomes "Unknown".

As these examples show, if you want to have default values for object properties and you want to be able to change the default values at run time, you should set the properties in the constructor's prototype, not in the constructor function itself.

Determining instance relationships

Property lookup in JavaScript looks within an object's own properties and, if the property name is not found, it looks within the special object property __proto__. This continues recursively; the process is called "lookup in the prototype chain".

The special property __proto__ is set when an object is constructed; it is set to the value of the constructor's prototype property. So the expression new Foo() creates an object with __proto__ == Foo.prototype. Consequently, changes to the properties of Foo.prototype alters the property lookup for all objects that were created by new Foo().

Every object has a __proto__ object property (except Object); every function has a prototype object property. So objects can be related by 'prototype inheritance' to other objects. You can test for inheritance by comparing an object's __proto__ to a function's prototype object. JavaScript provides a shortcut: the instanceof operator tests an object against a function and returns true if the object inherits from the function prototype. For example,

var f = new Foo();
var isTrue = (f instanceof Foo);

For a more detailed example, suppose you have the same set of definitions shown in Inheriting properties. Create an Engineer object as follows:

var chris = new Engineer("Pigman, Chris", ["jsd"], "fiji");

With this object, the following statements are all true:

chris.__proto__ == Engineer.prototype;
chris.__proto__.__proto__ == WorkerBee.prototype;
chris.__proto__.__proto__.__proto__ == Employee.prototype;
chris.__proto__.__proto__.__proto__.__proto__ == Object.prototype;
chris.__proto__.__proto__.__proto__.__proto__.__proto__ == null;

Given this, you could write an instanceOf function as follows:

function instanceOf(object, constructor) {
   object = object.__proto__;
   while (object != null) {
      if (object == constructor.prototype)
         return true;
      if (typeof object == 'xml') {
        return constructor.prototype == XML.prototype;
      }
      object = object.__proto__;
   }
   return false;
}

Using the instanceOf function defined above, these expressions are true:

instanceOf (chris, Engineer)
instanceOf (chris, WorkerBee)
instanceOf (chris, Employee)
instanceOf (chris, Object)

But the following expression is false:

instanceOf (chris, SalesPerson)

Global information in constructors

When you create constructors, you need to be careful if you set global information in the constructor. For example, assume that you want a unique ID to be automatically assigned to each new employee. You could use the following definition for Employee:

var idCounter = 1;

function Employee (name, dept) {
   this.name = name || "";
   this.dept = dept || "general";
   this.id = idCounter++;
}

With this definition, when you create a new Employee, the constructor assigns it the next ID in sequence and then increments the global ID counter. So, if your next statement is the following, victoria.id is 1 and harry.id is 2:

var victoria = new Employee("Pigbert, Victoria", "pubs")
var harry = new Employee("Tschopik, Harry", "sales")

At first glance that seems fine. However, idCounter gets incremented every time an Employee object is created, for whatever purpose. If you create the entire Employee hierarchy shown in this chapter, the Employee constructor is called every time you set up a prototype. Suppose you have the following code:

var idCounter = 1;

function Employee (name, dept) {
   this.name = name || "";
   this.dept = dept || "general";
   this.id = idCounter++;
}

function Manager (name, dept, reports) {...}
Manager.prototype = new Employee;

function WorkerBee (name, dept, projs) {...}
WorkerBee.prototype = new Employee;

function Engineer (name, projs, mach) {...}
Engineer.prototype = new WorkerBee;

function SalesPerson (name, projs, quota) {...}
SalesPerson.prototype = new WorkerBee;

var mac = new Engineer("Wood, Mac");

Further assume that the definitions omitted here have the base property and call the constructor above them in the prototype chain. In this case, by the time the mac object is created, mac.id is 5.

Depending on the application, it may or may not matter that the counter has been incremented these extra times. If you care about the exact value of this counter, one possible solution involves instead using the following constructor:

function Employee (name, dept) {
   this.name = name || "";
   this.dept = dept || "general";
   if (name)
      this.id = idCounter++;
}

When you create an instance of Employee to use as a prototype, you do not supply arguments to the constructor. Using this definition of the constructor, when you do not supply arguments, the constructor does not assign a value to the id and does not update the counter. Therefore, for an Employee to get an assigned id, you must specify a name for the employee. In this example, mac.id would be 1.

No multiple inheritance

Some object-oriented languages allow multiple inheritance. That is, an object can inherit the properties and values from unrelated parent objects. JavaScript does not support multiple inheritance.

Inheritance of property values occurs at run time by JavaScript searching the prototype chain of an object to find a value. Because an object has a single associated prototype, JavaScript cannot dynamically inherit from more than one prototype chain.

In JavaScript, you can have a constructor function call more than one other constructor function within it. This gives the illusion of multiple inheritance. For example, consider the following statements:

function Hobbyist (hobby) {
   this.hobby = hobby || "scuba";
}

function Engineer (name, projs, mach, hobby) {
   this.base1 = WorkerBee;
   this.base1(name, "engineering", projs);
   this.base2 = Hobbyist;
   this.base2(hobby);
   this.machine = mach || "";
}
Engineer.prototype = new WorkerBee;

var dennis = new Engineer("Doe, Dennis", ["collabra"], "hugo")

Further assume that the definition of WorkerBee is as used earlier in this chapter. In this case, the dennis object has these properties:

dennis.name == "Doe, Dennis"
dennis.dept == "engineering"
dennis.projects == ["collabra"]
dennis.machine == "hugo"
dennis.hobby == "scuba"

So dennis does get the hobby property from the Hobbyist constructor. However, assume you then add a property to the Hobbyist constructor's prototype:

Hobbyist.prototype.equipment = ["mask", "fins", "regulator", "bcd"]

The dennis object does not inherit this new property.