Saving and restoring state
Before we look at the transformation methods, I'll introduce two other methods which are indispensible once you start generating ever more complex drawings.
save()
restore()
The canvas save
and restore
methods are used to save and retrieve the canvas state. The canvas drawing state is basically a snapshot of all the styles and transformations that have been applied. Both methods take no parameters.
Canvas states are stored on a stack. Every time the save
method is called, the current drawing state is pushed onto the stack. A drawing state consists of
- The transformations that have been applied (i.e. translate, rotate and scale - see below).
- The values of
strokeStyle
,fillStyle
,globalAlpha
,lineWidth
,lineCap
,lineJoin
,miterLimit
,shadowOffsetX
,shadowOffsetY
,shadowBlur
,shadowColor
,globalCompositeOperation
properties. - The current clipping path, which we'll see in the next section.
You can call the save
method as many times as you like.
Every time the restore
method is called, the last saved state is returned from the stack and all saved settings are restored.
A save and restore canvas state example
This example tries to illustrate how the stack of drawing states functions by drawing a set of consecutive rectangles.
The first step is to draw a large rectangle with the default settings. Next we save this state and make changes to the fill color. We then draw the second and smaller blue rectangle and save the state. Again we change some drawing settings and draw the third semi-transparent white rectangle.
So far this is pretty similar to what we've done in previous sections. However once we call the first restore
statement, the top drawing state is removed from the stack, and settings are restored. If we hadn't saved the state using save
, we would need to change the fill color and transparency manually in order to return to the previous state. This would be easy for two properties, but if we have more than that, our code would become very long, very fast.
When the second restore
statement is called, the original state (the one we set up before the first call to save
) is restored and the last rectangle is once again drawn in black.
function draw() { var ctx = document.getElementById('canvas').getContext('2d'); ctx.fillRect(0,0,150,150); // draw a rectangle with default settings ctx.save(); // Save the default state ctx.fillStyle = '#09F' // Make changes to the settings ctx.fillRect(15,15,120,120); // Draw a rectangle with new settings ctx.save(); // Save the current state ctx.fillStyle = '#FFF' // Make changes to the settings ctx.globalAlpha = 0.5; ctx.fillRect(30,30,90,90); // Draw a rectangle with new settings ctx.restore(); // Restore previous state ctx.fillRect(45,45,60,60); // Draw a rectangle with restored settings ctx.restore(); // Restore original state ctx.fillRect(60,60,30,30); // Draw a rectangle with restored settings }
Translating
The first of the transformation methods we'll look at is translate
. This method is used to move the canvas and its origin to a different point in the grid.
translate(x, y)
This method takes two arguments. x is the amount the canvas is moved to the left or right, and y is the amount it's moved up or down (illustrated by the image on the right).
It's a good idea to save the canvas state before doing any transformations. In most cases, it is just easier to call the restore
method than having to do a reverse translation to return to the original state. Also if you're translating inside a loop and don't save and restore the canvas state, you might end up missing part of your drawing, because it was drawn outside the canvas edge.
A translate
example
This example demonstrates some of the benefits of translating the canvas origin. I've made a function drawSpirograph
that draws spirograph patterns. These are drawn around the origin. If I didn't use the translate
function, I would only see a quarter of the pattern on the canvas. The translate
method also gives me the freedom to place it anywhere on the canvas without having to manually adjust coordinates in the spirograph function. This makes it a little easier to understand and use.
In the draw
function I call the drawSpirograph
nine times using two for
loops. In each loop the canvas is translated, the spirograph is drawn, and the canvas is returned back to its original state.
function draw() { var ctx = document.getElementById('canvas').getContext('2d'); ctx.fillRect(0,0,300,300); for (var i=0;i<3;i++) { for (var j=0;j<3;j++) { ctx.save(); ctx.strokeStyle = "#9CFF00"; ctx.translate(50+j*100,50+i*100); drawSpirograph(ctx,20*(j+2)/(j+1),-8*(i+3)/(i+1),10); ctx.restore(); } } } function drawSpirograph(ctx,R,r,O){ var x1 = R-O; var y1 = 0; var i = 1; ctx.beginPath(); ctx.moveTo(x1,y1); do { if (i>20000) break; var x2 = (R+r)*Math.cos(i*Math.PI/72) - (r+O)*Math.cos(((R+r)/r)*(i*Math.PI/72)) var y2 = (R+r)*Math.sin(i*Math.PI/72) - (r+O)*Math.sin(((R+r)/r)*(i*Math.PI/72)) ctx.lineTo(x2,y2); x1 = x2; y1 = y2; i++; } while (x2 != R-O && y2 != 0 ); ctx.stroke(); }
Rotating
The second transformation method is rotate
. We use it to rotate the canvas around the current origin.
rotate(angle)
This method only takes one parameter and that's the angle the canvas is rotated by. This is a clockwise rotation measured in radians (illustrated in the image on the right).
The rotation center point is always the canvas origin. To change the center point, we will need to move the canvas by using the translate
method.
A rotate
example
In the example, you can see on the right, I used the rotate
method to draw shapes in a circular pattern. You could also have calculated the individual x and y coordinates (x = r*Math.cos(a); y = r*Math.sin(a)
). In this case it doesn't really matter which method you choose, because we're drawing circles. Calculating the coordinates results in only rotating the center positions of the circles and not the circles themselves, while using rotate
results in both, but of course circles look the same no matter how far they are rotated about their centers.
Again we have two loops. The first determines the number of rings, and the second determines the number of dots drawn in each ring. Before drawing each ring, I save the canvas state, so I can easily retrieve it. For each dot that is drawn, I rotate the canvas coordinate space by an angle that is determined by the number of dots in the ring. The innermost circle has six dots, so in each step, I rotate over an angle of 360/6 = 60 degrees. With each additional ring, the number of dots is doubled, and the angle in turn is halved.
function draw() { var ctx = document.getElementById('canvas').getContext('2d'); ctx.translate(75,75); for (i=1;i<6;i++){ // Loop through rings (from inside to out) ctx.save(); ctx.fillStyle = 'rgb('+(51*i)+','+(255-51*i)+',255)'; for (j=0;j<i*6;j++){ // draw individual dots ctx.rotate(Math.PI*2/(i*6)); ctx.beginPath(); ctx.arc(0,i*12.5,5,0,Math.PI*2,true); ctx.fill(); } ctx.restore(); } }
Scaling
The next transformation method is scaling. We use it to increase or decrease the units in our canvas grid. This can be used to draw scaled down or enlarged shapes and bitmaps.
scale(x, y)
This method takes two parameters. x
is the scale factor in the horizontal direction and y
is the scale factor in the vertical direction. Both parameters must be positive numbers. Values smaller than 1.0 reduce the unit size and values larger than 1.0 increase the unit size. Setting the scaling factor to precisely 1.0 doesn't affect the unit size.
By default one unit on the canvas is exactly one pixel. If we apply, for instance, a scaling factor of 0.5, the resulting unit would become 0.5 pixels and so shapes would be drawn at half size. In a similar way setting the scaling factor to 2.0 would increase the unit size and one unit now becomes two pixels. This results in shapes being drawn twice as large.
A scale
example
In this last example I've used the spirograph function from one of the previous examples to draw nine shapes with different scaling factors. The top left shape has been drawn with no scaling applied. The yellow shapes to the right both have a uniform scaling factor (the same value for x and y parameters). If you look at the code below you'll see that I've used the scale
method twice with equal parameter values for the second and third spirograph. Because I didn't restore the canvas state, the third shape is drawn with a scaling factor of 0.75 × 0.75 = 0.5625.
The second row of blue shapes have a non-uniform scaling applied in a vertical direction. Each of the shapes has the x scaling factor set to 1.0 which means no scaling. The y scaling factor is set to 0.75. This results in the three shapes being squashed down. The original circular shape has now become an ellipse. If you look closely you'll see that the line width has also been reduced in the vertical direction.
The third row of green shapes is similar to the one above but now I've applied a scaling in the horizontal direction.
function draw() { var ctx = document.getElementById('canvas').getContext('2d'); ctx.strokeStyle = "#fc0"; ctx.lineWidth = 1.5; ctx.fillRect(0,0,300,300); // Uniform scaling ctx.save() ctx.translate(50,50); drawSpirograph(ctx,22,6,5); // no scaling ctx.translate(100,0); ctx.scale(0.75,0.75); drawSpirograph(ctx,22,6,5); ctx.translate(133.333,0); ctx.scale(0.75,0.75); drawSpirograph(ctx,22,6,5); ctx.restore(); // Non uniform scaling (y direction) ctx.strokeStyle = "#0cf"; ctx.save() ctx.translate(50,150); ctx.scale(1,0.75); drawSpirograph(ctx,22,6,5); ctx.translate(100,0); ctx.scale(1,0.75); drawSpirograph(ctx,22,6,5); ctx.translate(100,0); ctx.scale(1,0.75); drawSpirograph(ctx,22,6,5); ctx.restore(); // Non uniform scaling (x direction) ctx.strokeStyle = "#cf0"; ctx.save() ctx.translate(50,250); ctx.scale(0.75,1); drawSpirograph(ctx,22,6,5); ctx.translate(133.333,0); ctx.scale(0.75,1); drawSpirograph(ctx,22,6,5); ctx.translate(177.777,0); ctx.scale(0.75,1); drawSpirograph(ctx,22,6,5); ctx.restore(); }
Transforms
변환 메소드 중 마지막은 변환 행렬을 직접 수정하는 방법입니다.
transform(m11, m12, m21, m22, dx, dy)
위 메소드는 현재의 변환 행렬에 다음 행렬을 곱합니다.
m11 m21 dx m12 m22 dy 0 0 1
인자들 중 하나라도 무한대가 있을 경우 해당 메소드는 예외를 던지지 않고 변환 행렬을 무한대로 지정합니다.
setTransform(m11, m12, m21, m22, dx, dy)
위 메소드는 현재 변환을 단위 행렬로 리셋하고 동일한 인자들로 transform
메소드를 호출합니다. 인자들 중 하나라도 무한대일 경우 메소드는 예외를 던지지 않고 변환 행렬을 무한대로 지정합니다.
transform
/ setTransform
예제
function draw() { var canvas = document.getElementById("canvas"); var ctx = canvas.getContext("2d"); var i = 0; var sin = Math.sin(Math.PI/6); var cos = Math.cos(Math.PI/6); ctx.translate(200, 200); var c = 0; for (i; i <= 12; i++) { c = Math.floor(255 / 12 * i); ctx.fillStyle = "rgb(" + c + "," + c + "," + c + ")"; ctx.fillRect(0, 0, 100, 10); ctx.transform(cos, sin, -sin, cos, 0, 0); } ctx.setTransform(-1, 0, 0, 1, 200, 200); ctx.fillStyle = "rgba(255, 128, 255, 0.5)"; ctx.fillRect(0, 50, 100, 100); }