Please note, this is a STATIC archive of website developer.mozilla.org from 03 Nov 2016, cach3.com does not collect or store any user information, there is no "phishing" involved.

Advanced box effects

Nos bénévoles n'ont pas encore traduit cet article en Français. Aidez-nous à réaliser cette tâche !

This article acts as a box of tricks, providing an introduction to some of the advanced features available for styling boxes that don't fit into the other categories above — like box shadows, blend modes and filters.

Prerequisites: HTML basics (study Introduction to HTML) and an idea of how CSS works (study Introduction to CSS.)
Objective: To get an idea about how to used advanced box effects, and know about some of the nascent styling tools that are appearing in the CSS language.

Box shadows

Back in our Styling text module, we looked at the text-shadow property, which allows you to apply one or more drop shadows to the text of an element. Well, an equivalent property exists for boxes — box-shadow allows you to apply one or more drop shadows to an actual element box. Like text shadows, box shadows are supported pretty well across browsers, but only in IE9+. Your users of older IE versions might just have to cope with no shadows, so just test your designs to make sure your content is legible without them.

You can find the examples in this section at box-shadow.html (see the source code too).

A simple box shadow

Let's look at a simple example to get things started. First, some HTML:

<article class="simple">
  <p><strong>Warning</strong>: The thermostat on the cosmic transcender has reached a critical level.</p>
</article>

Now the CSS:

p {
  margin: 0;
}

article {
   max-width: 500px;
  padding: 10px;
  background-color: red;
  background-image: linear-gradient(to bottom, rgba(0,0,0,0), rgba(0,0,0,0.25));
}  

.simple {
  box-shadow: 5px 5px 5px rgba(0,0,0,0.7);
}

This gives us the following result:

You'll see that we've got four items in the box-shadow property value:

  1. The first length value is the horizontal offset — the distance to the right the shadow is offset from the original box (or left, if the value is negative).
  2. The second length value is the vertical offset — the distance downwards that the shadow is offset from the original box (or upwards, if the value is negative).
  3. The third length value is the blur radius — the amount of blurring applied to the shadow.
  4. The color value is the base color of the shadow.

You can use any length and color units that would make sense to do so to define these values.

Multiple box shadows

You can also specify multiple box shadows in a single box-shadow declaration, by separating them with commas:

p {
  margin: 0;
}

article {
   max-width: 500px;
  padding: 10px;
  background-color: red;
  background-image: linear-gradient(to bottom, rgba(0,0,0,0), rgba(0,0,0,0.25));
}  

.multiple {
  box-shadow: 1px 1px 1px black,
              2px 2px 1px black,
              3px 3px 1px red,
              4px 4px 1px red,
              5px 5px 1px black,
              6px 6px 1px black;
}

Now we get this result:

We've done something fun here by creating a raised box with multiple coloured layers, but you could use it in any way you want, for example to create a more realistic look with shadows based on multiple light sources.

Other box shadow features

Unlike text-shadow, box-shadow has an inset keyword available — putting this at the start of a shadow declaration causes it to become an inner shadow, rather than an outer shadow. Let's have a look and see what we mean.

First, we'll go with some different HTML for this example:

<button>Press me!</button>
button {
  width: 150px;
  font-size: 1.1rem;
  line-height: 2;
  border-radius: 10px;
  border: none;
  background-image: linear-gradient(to bottom right, #777, #ddd);
  box-shadow: 1px 1px 1px black,
              inset 2px 3px 5px rgba(0,0,0,0.3),
              inset -2px -3px 5px rgba(255,255,255,0.5);
}

button:focus, button:hover {
  background-image: linear-gradient(to bottom right, #888, #eee);
}

button:active {
  box-shadow: inset 2px 2px 1px black,
              inset 2px 3px 5px rgba(0,0,0,0.3),
              inset -2px -3px 5px rgba(255,255,255,0.5);
}

This gives us the following result:

Here we've set up some button styling along with focus/hover/active states. The button has a simple black box shadow set on it by default, plus a couple of inset shadows, one light and one dark, placed on opposite corners of the button to give it a nice shading effect.

When the button is pressed in, the active state causes the first box shadow to be swapped for a very dark inset shadow, giving the appearence of the button being pressed in.

Note: There is another item that can be set in the box-shadow value — another length value can be optionally set just before the color value, which is a spread radius. If set, this causes the shadow to become bigger than the original box. It is not very commonly used, but worth mentioning.

Filters

CSS Filters provide a way to apply filters to an element in the same way as you might apply a filter to a layer in a graphics package like Photoshop. There are a number of different options available, and you can read all about them in greater detail on the filter reference page. In this section, we'll explain to you the syntax, and show you how much fun the results can be.

Basically, a filter can be applied to any element, block or inline — you just use the filter property, and give it a value of a particular filter function. Some of the filter options available do very similar things to other CSS features, for example drop-shadow() works in a very similar way and gives a similar effect to box-shadow or text-shadow.  The really nice thing about filters however, is that they work on the exact shapes of the content inside the box, not just the box itself as one big chunk, which can look nicer, although it may not always be what you want. Let's use a simple example to illustrate what we mean:

First, some simple HTML:

<p class="filter">Filter</p>

<p class="box-shadow">Box shadow</p>

And now some CSS to a apply a drop shadow to each:

p {
  margin: 1rem auto;
  padding: 20px;
  width: 100px;
  border: 5px dashed red;
}

.filter {
  -webkit-filter: drop-shadow(5px 5px 1px rgba(0,0,0,0.7));
  filter: drop-shadow(5px 5px 1px rgba(0,0,0,0.7));
}

.box-shadow {
  box-shadow: 5px 5px 1px rgba(0,0,0,0.7);
}

This gives us the following result:

As you can see, the filter drop-shadow follows the exact shape of the text and border dashes. The box shadow just follows the square of the box.

Some other things to note:

  • Filters are very new — they are supported in most modern browsers, including Microsoft Edge, but they are not supported in Internet Explorer at all. If you use filters in your designs, you should therefore make sure your content is usable without the filters.
  • You'll see that we've included a version of the filter property with -webkit- prefixed. This is called a Vendor Prefix, and is used sometimes by a browser before it finalizes its implementation of a new feature, to support that feature and experiment with it while not clashing with the non-prefixed version. Vendor prefixes were never intended to be used by web developers, but they do get used sometimes on production pages if experimental features are really desired. In this case, the -webkit- version of the property is currently required for Chrome/Safari/Opera support, while Edge and Firefox use the final, non-prefixed version.

Note: If you do decide to use prefixes in your code, make sure you include all the prefixes required as well as the non-prefixed version, so the maximum number of browsers possible can use the feature, and when browsers later drop the prefixes, they can use the non-prefixed version too. Also be warned that these experimental features might change, so your code might break. It is really best to just experiment with these features until the prefixes are removed.

You can see some other filter examples at filters.html (also see the source code).

Blend modes

CSS blend modes allow us to add blend modes to elements that specify a blending effect when two elements overlap — the final color shown for each pixel will be the result of a combination of the original pixel color, and that of the pixel in the layer underneath it. Blend modes are again very familiar to users of graphics applications like Photoshop.

There are two properties that use blend modes in CSS: background-blend-mode, which blends together multiple background images and colors set on a single element, and mix-blend-mode, which blends together the element it is set on with elements it is overlapping — both background and content.

You can find a lot more examples than are available here in our blend-modes.html example page (see source code), and on the <blend-mode> reference page.

Note: Blend modes are also very new, and slightly less well supported than filters. There is no support as yet in Edge, and Safari only supports some of the blend mode options.

background-blend-mode

Again, let's look at some examples so we can understand this better. First, background-blend-mode — here we'll show a couple of simple <div>s, so you can compare the original with the blended version:

<div>
</div>
<div class="multiply">
</div>

Now some CSS — we are adding two background images to the <div>s: a linear gradient and a png:

div {
  width: 280px;
  height: 130px;
  padding: 10px;
  margin: 10px;
  display: inline-block;
  background-color: red;
  background: url(https://mdn.mozillademos.org/files/13090/colorful-heart.png) no-repeat center 20px,
              linear-gradient(to bottom right, #f33, #a33);
}

.multiply {
  background-blend-mode: multiply;
}

The result we get is this — you can see the multiply blend mode on the right:

mix-blend-mode

Now let's look at mix-blend-mode. Here we'll present the same two <div>s, but each one is now sat on top of a simple <div> with a light blue background, to show how the elements will blend together:

<article>
  No mix blend mode
  <div>
        
  </div>
  <div>
  </div>
</article>

<article>
  Multiply mix
  <div class="multiply-mix">
        
  </div>
  <div>
  </div>
</article>

Here's the CSS we'll style this with:

article {
  width: 300px;
  height: 180px;
  margin: 10px;
  position: relative;
  display: inline-block;
}

div {
  width: 250px;
  height: 130px;
  padding: 10px;
  margin: 10px;
}

article div:first-child {
  position: absolute;
  top: 10px;
  left: 0;
  background-color: red;
  background: url(https://mdn.mozillademos.org/files/13090/colorful-heart.png) no-repeat center 20px,
                  linear-gradient(to bottom right, #f33, #a33);
}

article div:last-child {
  background-color: aqua;
  position: absolute;
  bottom: -10px;
  right: 0;
  z-index: -1;
}

.multiply-mix {
  mix-blend-mode: multiply;
}

This gives us the following results:

You can see here that the multiply mix blend has blended together not only the two background images, but also the color from bottom <div> below it too.

Note: Don't worry if you don't understand some of the layout properties above, like positiontopbottomz-index, etc. We will cover these in great detail in our upcoming CSS Layout module (TBD).

-webkit-background-clip: text

Another nascent feature we thought we'd mention briefly before moving on (currently supported in Chrome, Safari, and Opera, and being implemented in Firefox) is the text value for background-clip. When used along with the proprietary -webkit-text-fill-color: transparent; feature, this allows you to clip background images to the shape of the element's text, making for some nice effects. This is not an official standard, but has been implemented across multiple browsers, as it is popular, and used fairly widely by developers. When used in this context, both of the properties would require a -webkit- vendor prefix, even for Non-Webkit/Chrome-based browsers:

.text-clip {
  -webkit-background-clip: text;
  -webkit-text-fill-color: transparent;
}

So why have other browsers implemented a -webkit- prefix? Mainly for browser compatibility — so many web developers have started implementing web sites with -webkit- prefixes that it started to look like the other browsers were broken, whereas in actual fact they were following the standards. So they were forced to implement a few such features. This highlights the danger of using non-standard and/or prefixed CSS features in your work — not only do they cause browser compatibility issues, but they are also subject to change, so your code could break at any time. It is much better to stick to the standards.

If you do want to use such features in your production work, make sure to test across browsers thoroughly and check that, where these features don't work, the site is still usable.

Note: For a full -webkit-background-clip: text code example, see background-clip-text.html (see also the source code).

Active learning: experiment with some effects

Now it's your turn. For this active learning, we want you to experiment with some of the effects you've read about above, using the provided code below.

If you make a mistake, you can always reset the example using the Reset button.

Summary

We hope this article has proved to be fun — playing with shiny toys generally is, and it is always interesting to see what kinds of tools are just becoming available in cutting edge browsers. You've reached the end of the Styling boxes articles, so next up you'll test your box syling skills with our assessments.

Étiquettes et contributeurs liés au document

 Contributeurs à cette page : chrisdavidmills, richardzacur, Sebastianz
 Dernière mise à jour par : chrisdavidmills,