Please note, this is a STATIC archive of website developer.mozilla.org from 03 Nov 2016, cach3.com does not collect or store any user information, there is no "phishing" involved.
Результаты вашего поиска

    filter

    Перевод не завершен. Пожалуйста, помогите перевести эту статью с английского.

    Это экспериментальная технология
    Так как спецификация этой технологии ещё не стабилизировалась, смотрите таблицу совместимости по поводу использования в различных браузерах. Также заметьте, что синтаксис и поведение экспериментальной технологии может измениться в будущих версиях браузеров, вслед за изменениями спецификации.

    Описание

    The filter property provides for effects like blurring or color shifting on an element’s rendering before the element is displayed. Filters are commonly used to adjust the rendering of an image, a background, or a border.

    Included in the CSS standard are several functions that achieve predefined effects. You can also reference a filter specified in SVG with a URL to an SVG filter element.

    Предупреждение: Older versions (4.0 through 9.0) of the Windows Internet Explorer browser supported a non-standard "filter" that has since been deprecated.

    Начальное значениеnone
    Применяется квсе элементы; в SVG, это применяется к контейнерам, исключая элемент defs и все графические элементы
    Наследуетсянет
    Отображениевизуальный
    Обработка значениякак указано
    Анимируемостьда
    Канонический порядокуникальный неоднозначный порядок, определённый формальной грамматикой

    Синтаксис

    filter: url(resources.svg);
filter: blur(5px);
filter: brightness(0.4);
filter: contrast(200%);
filter: drop-shadow(16px 16px 20px blue);
filter: grayscale(50%);
filter: hue-rotate(90deg);
filter: invert(75%);
filter: opacity(25%);
filter: saturate(30%);
filter: sepia(60%);

/* Применение нескольких фильтров */
filter: contrast(175%) brightness(3%);

/* Глобальные значения */
filter: inherit;
filter: initial;
filter: unset;

    With a function, use the following:

    filter: <filter-function> [<filter-function>]* | none

    For a reference to an SVG <filter> element, use the following:

    filter: url(svg-url#element-id)

    Формальный синтаксис

    none | <filter-function-list>
    где 
    <filter-function-list> = [ <filter-function> | <url> ]+
    где 
    <filter-function> = <blur()> | <brightness()> | <contrast()> | <drop-shadow()> | <grayscale()> | <hue-rotate()> | <invert()> | <opacity()> | <sepia()> | <saturate()>
    где 
    <blur()> = blur( <length> )
    <brightness()> = brightness( [ <number> | <percentage> ] )
    <contrast()> = contrast( [ <number> | <percentage> ] )
    <drop-shadow()> = drop-shadow( <length>{2,3} <color>? )
    <grayscale()> = grayscale( [ <number> | <percentage> ] )
    <hue-rotate()> = hue-rotate( <angle> )
    <invert()> = invert( [ <number> | <percentage> ] )
    <opacity()> = opacity( [ <number> | <percentage> ] )
    <sepia()> = sepia( [ <number> | <percentage> ] )
    <saturate()> = saturate( [ <number> | <percentage> ] )
    где 
    <color> = <rgb()> | <rgba()> | <hsl()> | <hsla()> | <hex-color> | <named-color> | currentcolor | <deprecated-system-color>
    где 
    <rgb()> = rgb( <rgb-component>#{3} )
    <rgba()> = rgba( <rgb-component>#{3} , <alpha-value> )
    <hsl()> = hsl( <hue>, <percentage>, <percentage> )
    <hsla()> = hsla( <hue>, <percentage>, <percentage>, <alpha-value> )
    <named-color> = <ident>
    <deprecated-system-color> = ActiveBorder | ActiveCaption | AppWorkspace | Background | ButtonFace | ButtonHighlight | ButtonShadow | ButtonText | CaptionText | GrayText | Highlight | HighlightText | InactiveBorder | InactiveCaption | InactiveCaptionText | InfoBackground | InfoText | Menu | MenuText | Scrollbar | ThreeDDarkShadow | ThreeDFace | ThreeDHighlight | ThreeDLightShadow | ThreeDShadow | Window | WindowFrame | WindowText
    где 
    <rgb-component> = <integer> | <percentage>
    <alpha-value> = <number>
    <hue> = <number>

    Примеры

    Examples of using the predefined functions are shown below. See each function for a specific example.

    .mydiv { filter: grayscale(50%) }

/* gray all images by 50% and blur by 10px */
img {
  filter: grayscale(0.5) blur(10px);
}

    Examples of using the URL function with an SVG resource are shown below.

    .target { filter: url(#c1); }

.mydiv { filter: url(commonfilters.xml#large-blur) }

    Функции

    To use the CSS filter property, you specify a value for one of the following functions. If the value is invalid, the function returns "none." Except where noted, the functions that take a value expressed with a percent sign (as in 34%) also accept the value expressed as decimal (as in 0.34).

    url()

    The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element.

    filter: url(resources.svg#c1)

    blur() [размытие]

    Applies a Gaussian blur to the input image. The value of ‘radius’ defines the value of the standard deviation to the Gaussian function, or how many pixels on the screen blend into each other, so a larger value will create more blur. If no parameter is provided, then a value 0 is used. The parameter is specified as a CSS length, but does not accept percentage values.

    filter: blur(5px)

    <svg style="position: absolute; top: -99999px" xmlns="https://www.w3.org/2000/svg">
  <filter id="svgBlur" x="-5%" y="-5%" width="110%" height="110%">
    <feGaussianBlur in="SourceGraphic" stdDeviation="5"/>
  </filter>
</svg>

    brightness() [яркость]

    Applies a linear multiplier to input image, making it appear more or less bright. A value of 0% will create an image that is completely black. A value of 100% leaves the input unchanged. Other values are linear multipliers on the effect. Values of an amount over 100% are allowed, providing brighter results. If the ‘amount’ parameter is missing, a value of 1 is used.

    filter: brightness(0.5)
    <svg style="position: absolute; top: -99999px" xmlns="https://www.w3.org/2000/svg">
 <filter id="brightness">
    <feComponentTransfer>
        <feFuncR type="linear" slope="[amount]"/>
        <feFuncG type="linear" slope="[amount]"/>
        <feFuncB type="linear" slope="[amount]"/>
    </feComponentTransfer>
  </filter>
</svg>

    contrast() [контраст]

    Adjusts the contrast of the input. A value of 0% will create an image that is completely black. A value of 100% leaves the input unchanged. Values of amount over 100% are allowed, providing results with less contrast. If the ‘amount’ parameter is missing, a value of 1 is used.

    filter: contrast(200%)

    <svg style="position: absolute; top: -99999px" xmlns="https://www.w3.org/2000/svg">
  <filter id="contrast">
    <feComponentTransfer>
      <feFuncR type="linear" slope="[amount]" intercept="-(0.5 * [amount]) + 0.5"/>
      <feFuncG type="linear" slope="[amount]" intercept="-(0.5 * [amount]) + 0.5"/>
      <feFuncB type="linear" slope="[amount]" intercept="-(0.5 * [amount]) + 0.5"/>
    </feComponentTransfer>
  </filter>
</svg>

    drop-shadow() [тень]

    Applies a drop shadow effect to the input image. A drop shadow is effectively a blurred, offset version of the input image's alpha mask drawn in a particular color, composited below the image. The function accepts a parameter of type <shadow> (defined in CSS3 Backgrounds), with the exception that the ‘inset’ keyword is not allowed. This function is similar to the more established box-shadow property; the difference is that with filters, some browsers provide hardware acceleration for better performance. The parameters of the <shadow> parameter are as follows.

    <offset-x> <offset-y> (required)
    These are two <length> values to set the shadow offset. <offset-x> specifies the horizontal distance. Negative values place the shadow to the left of the element. <offset-y> specifies the vertical distance. Negative values place the shadow above the element. See <length> for possible units.
    If both values are 0, the shadow is placed behind the element (and may generate a blur effect if <blur-radius> and/or <spread-radius> is set).
    <blur-radius> (optional)
    This is a third <length> value. The larger this value, the bigger the blur, so the shadow becomes bigger and lighter. Negative values are not allowed. If not specified, it will be 0 (the shadow's edge is sharp).
    <spread-radius> (optional)
    This is a fourth <length> value. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element). 
    Note: Webkit, and maybe other browsers, do not support this 4th length; it will not render if added.
    <color> (optional)
    See <color> values for possible keywords and notations. If not specified, the color depends on the browser. In Gecko (Firefox), Presto (Opera) and Trident (Internet Explorer), the value of the color property is used. On the other hand, WebKit's shadow is transparent and therefore useless if <color> is omitted.
    filter: drop-shadow(16px 16px 10px black)
    <svg style="position: absolute; top: -999999px" xmlns="https://www.w3.org/2000/svg">
 <filter id="drop-shadow">
    <feGaussianBlur in="SourceAlpha" stdDeviation="[radius]"/>
    <feOffset dx="[offset-x]" dy="[offset-y]" result="offsetblur"/>
    <feFlood flood-color="[color]"/>
    <feComposite in2="offsetblur" operator="in"/>
    <feMerge>
      <feMergeNode/>
      <feMergeNode in="SourceGraphic"/>
    </feMerge>
  </filter>
</svg>

    grayscale() [оттенки серого]

    Converts the input image to grayscale. The value of ‘amount’ defines the proportion of the conversion. A value of 100% is completely grayscale. A value of 0% leaves the input unchanged. Values between 0% and 100% are linear multipliers on the effect. If the ‘amount’ parameter is missing, a value of 0 is used.

    filter: grayscale(100%)

    hue-rotate() [изменение оттенка]

    Applies a hue rotation on the input image. The value of ‘angle’ defines the number of degrees around the color circle the input samples will be adjusted. A value of 0deg leaves the input unchanged. If the ‘angle’ parameter is missing, a value of 0deg is used. Though there is no maximum value, the effect of values above 360deg wraps around.

    filter: hue-rotate(90deg)
    <svg style="position: absolute; top: -999999px" xmlns="https://www.w3.org/2000/svg">
  <filter id="svgHueRotate" >
    <feColorMatrix type="hueRotate" values="[angle]" />
  <filter />
</svg>

    invert() [инвертирование]

    Inverts the samples in the input image. The value of ‘amount’ defines the proportion of the conversion. A value of 100% is completely inverted. A value of 0% leaves the input unchanged. Values between 0% and 100% are linear multipliers on the effect. If the ‘amount’ parameter is missing, a value of 0 is used.

    filter: invert(100%)

    opacity() [непрозрачность]

    Applies transparency to the samples in the input image. The value of ‘amount’ defines the proportion of the conversion. A value of 0% is completely transparent. A value of 100% leaves the input unchanged. Values between 0% and 100% are linear multipliers on the effect. This is equivalent to multiplying the input image samples by amount. If the ‘amount’ parameter is missing, a value of 1 is used. This function is similar to the more established opacity property; the difference is that with filters, some browsers provide hardware acceleration for better performance.

    filter: opacity(50%)

    saturate() [насыщенность]

    Saturates the input image. The value of ‘amount’ defines the proportion of the conversion. A value of 0% is completely un-saturated. A value of 100% leaves the input unchanged. Other values are linear multipliers on the effect. Values of amount over 100% are allowed, providing super-saturated results. If the ‘amount’ parameter is missing, a value of 1 is used.

    filter: saturate(200%)

    sepia() [сепия]

    Converts the input image to sepia. The value of ‘amount’ defines the proportion of the conversion. A value of 100% is completely sepia. A value of 0% leaves the input unchanged. Values between 0% and 100% are linear multipliers on the effect. If the ‘amount’ parameter is missing, a value of 0 is used.

    filter: sepia(100%)

    Комбинирование функций

    You may combine any number of functions to manipulate the rendering. The following example enhances the contrast and brightness of the image.

    filter: contrast(175%) brightness(103%)

    Спецификации

    Спецификация Статус Комментарий
    Filter Effects Module Level 1
    Определение 'filter' в этой спецификации.    		 Рабочий черновик Первоначальное определение

    Совместимость с браузерами

    Особенность Chrome Firefox (Gecko) Internet Explorer Opera Safari (WebKit)
    Базовая поддержка 18.0-webkit[1] 35 (35)[2] Нет[3] 15.0-webkit 6.0-webkit
    SVG элементы Нет[4] 35 (35) Нет Нет Нет
    Особенность Android Firefox Mobile (Gecko) IE Mobile Opera Mobile Safari Mobile
    Базовая поддержка 4.4-webkit 35 (35)[2] Нет 22.0 (Да)-webkit

    6.0 (Да)-webkit
    SVG элементы Нет[4] 35 (35) Нет Нет Нет

    [1] In Chrome 18 to 19, saturate() function only takes integers instead of decimal or percentage values. This bug is fixed in Chrome 20 and further.

    [2] Before Firefox 34, Gecko only implemented the url() form of the filter property; as chaining was not implemented then, only one url() was allowed (or when the layout.css.filters.enabled pref is set to false).

    The functional values of filter are controlled by the layout.css.filters.enabled pref and was available but disabled by default in Firefox 34.

    [3] Internet Explorer 4.0 to 9.0 implemented a non-standard filter property. The syntax was completely different from this one and is not documented here.

    [4] Blink does currently not implement this feature. See bug 109224.

    Смотрите также

    Метки документа и участники

     Внесли вклад в эту страницу: Sebastianz, andreww2012
     Обновлялась последний раз: Sebastianz,