nsIIOService

This interface duplicates many of the nsIProtocolHandler methods in a protocol handler independent way (For example newURI() inspects the scheme in order to delegate creation of the new URI to the appropriate protocol handler).

Implemented by @mozilla.org/network/io-service;1 as a service:

var iOService = Components.classes["@mozilla.org/network/io-service;1"]
                .getService(Components.interfaces.nsIIOService);

メソッドの概要

属性

メソッド

allowPort()

Checks if a port number is banned. This involves consulting a list of unsafe ports, corresponding to network services that may be easily exploitable. If the given port is considered unsafe, then the protocol handler (corresponding to aScheme) will be asked whether it wishes to override the IO service's decision to block the port. This gives the protocol handler ultimate control over its own security policy while ensuring reasonable, default protection.

Is similar to nsIProtocolHandler.allowPort().

boolean allowPort(
  in long aPort,
  in string aScheme
);

Parameters

aPort

The port to check

aScheme

The scheme for the protocol handler that could override the IOService's decision.

Return value

true if the port is allowed, false otherwise.

extractScheme()

Utility to extract the scheme from a URL string, consistently and according to spec (see RFC 3986).

ACString extractScheme(
  in AUTF8String urlString
);

Parameters

urlString

The string for the URL to extract the scheme from.

Return value

A string corresponding to the scheme.

Exceptions thrown

NS_ERROR_MALFORMED_URI

If URL string is not of the right form.

getProtocolFlags()

Returns the protocol flags for a given scheme.

unsigned long getProtocolFlags(
  in string aScheme
);

Parameters

aScheme

The scheme for which to get the protocol flags.

Return value

The value of the protocolFlags attribute for the corresponding nsIProtocolHandler.

getProtocolHandler()

Returns a protocol handler for a given URI scheme.

nsIProtocolHandler getProtocolHandler(
  in string aScheme
);

Parameters

aScheme

The URI scheme for which to get a protocol handler.

Return value

An nsIProtocolHandler for the scheme.

newChannel()

廃止 Gecko 48
newURI() や newChannelFromURI() の重複した呼び出しを避けるショートカットメソッドです。

nsIChannel newChannel(
  in AUTF8String aSpec,
  in string aOriginCharset,
  in nsIURI aBaseURI
);

Parameters

aSpec

希望するuriのためのスペックです。

aOriginCharset

uriのためのキャラクタセットです。たぶんnullになるでしょう。

aBaseURI

スペックのためベースURLです。たぶんnullになるでしょう。もしaSpecが相対パスだった時このパラメーターは無視されます。

Return value

Returns an nsIChannel based on aSpec and aBaseURI.

newChannel2()

newURI() や newChannelFromURI()の再呼び出しを避けるためのショートカットメソッドです。

nsIChannel newChannel2(
   in AUTF8String aSpec,
   in string aOriginCharset,
   in nsIURI aBaseURI,
   in nsIDOMNode aLoadingNode,
   in nsIPrincipal aLoadingPrincipal,
   in nsIPrincipal aTriggeringPrincipal,
   in uint32_t aSecurityFlags,
   in uint32_t aContentPolicyType,

);

Parameters

aSpec

希望するuriのためのスペックです。

aOriginCharset

uriのためのキャラクタセットです。たぶんnullになるでしょう。

aBaseURI

スペックのためベースURLです。たぶんnullになるでしょう。もしaSpecが相対パスだった時このパラメーターは無視されます。

aLoadingNode

チャンネルのloadingDocumentです。この要素やドキュメントがリクエストの結果として使われるでしょう。これはこのリクエストへの結果としてアクセスされる要素やドキュメントです。例として画像をロードする場合、これはイメージがロードされるドキュメントになります。そしてCSSの場合、 レンダリングがこのスタイルシートに影響を与えられるドキュメントになります。もし可能なら、ロードが実行される要素を渡します。しかしもしロードが XMLHttpRequestなどのJS API やforなどで複数の要素に渡って合体される場合は代わりにDocumentノードに渡します。ロードがアドオンや内部のブラウザ機能から来るようにロードがどんなドキュメントにも関連していない場合、nullを使います。

aLoadingPrincipal

チャンネルにロードするもののPrincipalです。 リクエストの結果としてこのドキュメントのprincipalが使用されます。 この値のデフォルトは aLoadingNode のprincipalです。そのため、もし aLoadingNode が渡された場合は、nullとして残すことができます。 しかし、aLoadingNode が null としてロードされている場合は、値を渡す必要があります。 例としてWebWorkerからロードする場合を考えてみます。この場合はworkerのprincipalを渡します。アドオンやブラウザ内部からロードする場合は、 system principalを渡します。This principal should almost always be the system principal if aLoadingNode is null. The only exception to this is for loads from WebWorkers since they don't have any nodes to be passed as aLoadingNode. Please note, aLoadingPrincipal is *not* the principal of the resource being loaded. But rather the principal of the context where the resource will be used.

aTriggeringPrincipal

The triggeringPrincipal of the load. The triggeringPrincipal is the principal of the resource that caused this particular URL to be loaded. Most likely the triggeringPrincipal and the loadingPrincipal are identical, in which case the triggeringPrincipal can be left out. In some cases the loadingPrincipal and the triggeringPrincipal are different however, e.g. a stylesheet may import a subresource. In that case the principal of the stylesheet which contains the import command is the triggeringPrincipal, and the principal of the document whose rendering is affected is the loadingPrincipal.

aSecurityFlags

このchannelのsecurityFlagsです。すべてのsecurityFlagsはnsILoadInfoで定義されています。

aContentPolicyType

このchannelのcontentPolicyTypeです。すべてのcontentPolicytypeはnsIContentPolicyで定義されています。

【訳注: アドオン開発者が暫定的に使う場合はTYPE_OTHERを使う。firefox開発者はTYPE_OTHERを使うのは避けるべきです】

【訳注: nsIContentPolicyがincludeしている nsIContentPolicyBase.idl に書いてあるっぽいです】

Return value

aSpecやaBaseURIに基づいた nsIChannel を返します。

newChannelFromURI()

廃止 Gecko 48

与えられたURIのチャンネルを作成します

nsIChannel newChannelFromURI(
  in nsIURI aURI
);

Parameters

aURI

An nsIURI from which to make a channel.

Return value

An nsIChannel for the uri.

newChannelFromURI2()

Creates a channel for a given URI.

nsIChannel newChannelFromURI2(
  in nsIURI aURI,
  in nsIDOMNode aLoadingNode,
  in nsIPrincipal aLoadingPrincipal,
  in nsIPrincipal aTriggeringPrincipal,
  in unsigned long aSecurityFlags,
  in unsigned long aContentPolicyType
);

Please note, if you provide both a loadingNode and a loadingPrincipal, then loadingPrincipal must be equal to loadingNode->NodePrincipal(). But less error prone is to just supply a loadingNode.

Keep in mind that URIs coming from a webpage should never use the systemPrincipal as the loadingPrincipal.

Parameters

aURI

An nsIURI from which to make a channel.

aLoadingNode

The loadingDocument of the channel.
The element or document where the result of this request will be used. This is the document/element that will get access to the result of this request. For example for an image load, it's the document in which the image will be loaded. And for a CSS stylesheet it's the document whose rendering will be affected by the stylesheet. If possible, pass in the element which is performing the load. But if the load is coming from a JS API (such as XMLHttpRequest) or if the load might be coalesced across multiple elements (such as for <img>) then pass in the Document node instead.

For loads that are not related to any document, such as loads coming from addons or internal browser features, use null here.

aLoadingPrincipal                                                     

The loadingPrincipal of the channel.

The principal of the document where the result of this request will be used.

This defaults to the principal of aLoadingNode, so when aLoadingNode is passed this can be left as null. However for loads where aLoadingNode is null this argument must be passed.  For example for loads from a WebWorker, pass the principal of that worker. For loads from an addon or from internal browser features, pass the system principal. This principal should almost always be the system principal if aLoadingNode is null. The only exception to this is for loads from WebWorkers since they don't have any nodes to be passed as aLoadingNode. Please note, aLoadingPrincipal is *not* the principal of the resource being loaded. But rather the principal of the context here the resource will be used.

aTriggeringPrincipal                                                  

The triggeringPrincipal of the load.

The triggeringPrincipal is the principal of the resource that caused this particular URL to be loaded. Most likely the triggeringPrincipal and the loadingPrincipal are identical, in which case the triggeringPrincipal can be left out. In some cases the loadingPrincipal and the triggeringPrincipal are different however, e.g. a stylesheet may import a subresource. In that case the principal of the stylesheet which contains the import command is the triggeringPrincipal, and the principal of the document whose rendering is affected is the loadingPrincipal.

aSecurityFlags                                                        

The securityFlags of the channel. Any of the securityflags defined in nsILoadInfo.idl

aContentPolicyType                                                        

The contentPolicyType of the channel. Any of the content types defined in nsIContentPolicy.idl              

Return value

An nsIChannel for the uri.

newChannelFromURIWithLoadInfo()

Creates a channel for a given URI. Equivalent to newChannelFromURI2(aURI, aLoadingNode, ...)

nsIChannel newChannelFromURIWithLoadInfo(
  in nsIURI aURI,
  in nsILoadInfo aLoadInfo
);

Parameters

aURI

An nsIURI from which to make a channel.

aLoadInfo

A load info object.

Return value

An nsIChannel for the uri.

newChannelFromURIWithProxyFlags2()

Gecko 48 が必要
Creates a channel for a given URI. Equivalent to newChannelFromURI2(aURI, aLoadingNode, ...)

nsIChannel newChannelFromURIWithProxyFlags2(
  in nsIURI aURI,
  in nsIURI aProxyURI,
  in uint32_t aProxyFlags,
  in nsIDOMNode aLoadingNode,
  in nsIPrincipal aLoadingPrincipal,
  in nsIPrincipal aTriggeringPrincipal,
  in uint32_t aSecurityFlags,
  in uint32_t aContentPolicyType
);

Parameters

aURI

An nsIURI from which to make a channel.

aProxyURI

nsIURI to use for proxy resolution. Can be null in which case aURI is used.

aPorxyFlags

Flags from nsIProtocolProxyService to use when resolving proxies for this new channel.

aLoadingNode

The loadingDocument of the channel. The element or document where the result of this request will be used. This is the document/element that will get access to the result of this request. For example for an image load, it's the document in which the image will be loaded. And for a CSS stylesheet it's the document whose rendering will be affected by the stylesheet. If possible, pass in the element which is performing the load. But if the load is coming from a JS API (such as XMLHttpRequest) or if the load might be coalesced across multiple elements (such as for ) then pass in the Document node instead. For loads that are not related to any document, such as loads coming from addons or internal browser features, use null here.

aLoadingPrincipal

The loadingPrincipal of the channel. The principal of the document where the result of this request will be used. This defaults to the principal of aLoadingNode, so when aLoadingNode is passed this can be left as null. However for loads where aLoadingNode is null this argument must be passed. For example for loads from a WebWorker, pass the principal of that worker. For loads from an addon or from internal browser features, pass the system principal. This principal should almost always be the system principal if aLoadingNode is null. The only exception to this is for loads from WebWorkers since they don't have any nodes to be passed as aLoadingNode. Please note, aLoadingPrincipal is *not* the principal of the resource being loaded. But rather the principal of the context where the resource will be used.

aTriggeringPrincipal

The triggeringPrincipal of the load. The triggeringPrincipal is the principal of the resource that caused this particular URL to be loaded. Most likely the triggeringPrincipal and the loadingPrincipal are identical, in which case the triggeringPrincipal can be left out. In some cases the loadingPrincipal and the triggeringPrincipal are different however, e.g. a stylesheet may import a subresource. In that case the principal of the stylesheet which contains the import command is the triggeringPrincipal, and the principal of the document whose rendering is affected is the loadingPrincipal.

aSecurityFlags

The securityFlags of the channel. Any of the securityflags defined in nsILoadInfo.

aContentPolicyType

The contentPolicyType of the channel. Any of the content types defined in nsIContentPolicy.

Return value

An nsIChannel for the uri.

newFileURI()

This method constructs a new URI from a nsIFile.

nsIURI newFileURI(
  in nsIFile aFile
);

Parameters

aFile

The nsIFile whose URI is desired.

Return value

An nsIURI corresponding to the file.

newURI()

This method constructs a new URI by determining the scheme of the URI spec, and then delegating the construction of the URI to the protocol handler for that scheme. QueryInterface can be used on the resulting URI object to obtain a more specific type of URI.

nsIURI newURI(
  in AUTF8String aSpec,
  in string aOriginCharset,
  in nsIURI aBaseURI
);

Parameters

aSpec

The spec for the desired uri.

aOriginCharset

The charset for the uri. May be null.

aBaseURI

The base URI for the spec. May be null. If aSpec is an absolute URL, this parameter is ignored.

Return value

An nsIURI object corresponding to aSpec and aBaseURI.

Exceptions thrown

NS_ERROR_MALFORMED_URI

If URI does not begin with a valid scheme (as defined by RFC 3986) followed by a colon.

備考

This was a frozen interface see バグ 157131 for details. From Gecko 2.0 interfaces are no longer frozen.

関連項目

• RFC 3986